How can I remove an engraved plate from my clock?

• Related Articles

• How to remove a battery-operated, quartz movement in order to replace it.

  Need to remove a battery-operated, quartz movement in order to replace it? Follow these simple steps: Remove the nut that secures the hands to the dial Gently remove the hands Remove the mounting nut the disengage the center shaft from the dial ...

• What if my radio controlled clock does not operate?

  If the clock was provided with a battery installed, ensure that the plastic cover is removed from the battery and that there’s no insulator strip between the battery and the contact. After following the details below and the clock still does not ...

• How to prepare a floor clock to be moved.

  Care should be taken whenever you move your clock to ensure that all accessory parts such as pendulum, weights, etc. are removed and packed properly to prevent damage. Use cotton gloves or a soft cloth when handling the pendulum or weights. For ...

• How to clean the inside glass of a floor clock case.

  CLICK HERE to watch a short video on how to safely remove the back panel of a a floor clock clean the inside glass case. This is helpful for the floor clock models that do not have front opening doors.

• What if my mechanical floor clock will not operate?

  Ensure that all of the packing material has been removed. If the clock is a pendulum type, ensure that the spring clip or rubber band has been removed from the back of the movement. Try re-starting your clock. For pendulum clocks, it is important to ...