Location of key, crank, and weights in the floor clock carton.
The key, crank, and weights are packed in a white Styrofoam carton under the clock.
How to wind a clock?
Floor Clocks with Cables and Pulleys ‚Äì Weights that are suspended by cables with pulleys should be raised by using the crank provided. DO NOT lift the weights by hand while cranking. Insert the crank into the holes located in the dial face. It does ...
What if my mechanical floor clock will not operate?
Ensure that all of the packing material has been removed. If the clock is a pendulum type, ensure that the spring clip or rubber band has been removed from the back of the movement. Try re-starting your clock. For pendulum clocks, it is important to ...
How to prepare a floor clock to be moved.
Care should be taken whenever you move your clock to ensure that all accessory parts such as pendulum, weights, etc. are removed and packed properly to prevent damage. Use cotton gloves or a soft cloth when handling the pendulum or weights. For ...
How to set up a floor clock?
Please refer to your owner's manual for proper clock set up. It will describe how to unpack and set up your clock, hang the pendulum, hang the weights, set the moon dial, set the time and start the clock. CLICK HERE to download the manual in ...
How to adjust a floor clock for Daylight Savings Time
It's simple to adjust your floor clock for Daylight Savings Time, simply move the minute hand counter clockwise 1 hour to "fall back" in the Fall, or simply move the minute hand clockwise 1 hour to "spring forward" in the Spring. No need to stop ...