The dial is tilted with chime hammers not aligned with the rods.

The dial is tilted with chime hammers not aligned with the rods.

When the top of a clock dial is tilted back and the chime hammers are not properly aligned with the chime rods, it may be an indication that the clock was dropped on its back during shipping.

Often, this type of ‚Äúconcealed damage‚Äù is not visible from the outside of the carton. Inspect for other possible damage. Notify the freight carrier and dealer in writing immediately and request a carrier inspection and damage report. Many carriers require that damage be reported within 48 hours and failure to do so may waive your rights to a damage claim. It is possible that significant damage did not occur and components only shifted as a result of being dropped. In most cases, this problem can be easily corrected by the Dealer or Service Center. 

 

 

    • Related Articles

    • How to adjust the chime tone.

      The chime tone may be affected by the hammer resting on the chime rod (coil) or striking the rod (coil) off center. Although the hammers were set at the factory, it is possible for the hammers to get out of adjustment. Chime hammer arms are made of ...

    • Broken or damaged chime rods.

      Contact a local service center for a replacement rod.  CLICK HERE to find your nearest Authorized Service Center

    • What if my mechanical clock will not chime or strike?

      Check that the strike on/off lever in not in the “strike off” position or halfway between positions. Check that the movement is not in the “night off” position. Be sure that all the packing material is removed from the movement area. You ...

    • Battery-operated, quartz dual chime movement will not operate.

      Old and exhausted batteries is the primary cause for the movement to malfunction while keeping time, playing a melody, or swinging the pendulum (on some models). Ensure that you are using brand new alkaline batteries and they are installed following ...

    • What is the function of the moon dial?

      Available on some models, the moon dial tracks the lunar month and the cycle of the full moon.  Other models have a stationary moon dial that are strictly ornamental and do not track the lunar month. Details for how to set the moon dial to the ...